Set mode operations, Time-out-timer(tot), Voice operated transmission (vox) – Alinco DJ-A10 User Manual
Page 64

Professional
FM Transceiver
46
Time-Out-Timer(TOT)
This function stops the transmission automatically when the continuous
transmission time exceeds the set time and alerts it with a beep.
1.Press and hold【PF2】key while turning on the radio, and keep pressing
【PF2】key for 3 seconds to enter into the Set Mode operations.
2.Press【B】/【C】key to choose the Menu 2 and display “
TOT
”.
3.Press【A】key then press【B】key or【C】key to choose the parameter, that
is from 15 to 240 seconds (4 minutes) in 15 seconds step.
OFF: TOT is OFF and default is 180s.
SET MODE OPERATIONS
Voice Operated Transmission (VOX)
After enabling this function, you can directly start transmitting by voice instead of pressing [PTT] key.
1.Press and hold【PF2】key while turning on the radio, and keep pressing
【PF2】key for 3 seconds to enter into the Set Mode operations.
2.Press【B】/【C】key to choose the Menu 3 and display “
VOX
”.
3.Press【A】key then press【B】key or【C】key to choose the parameter
Available parameters are 3 levels of VOX sensitivity in 1, 2 or 3. 1 is most
sensitive, 3 is less sensitive that requires more voice level to activate VOX.
OFF: VOX transmitting is disabled. Default is OFF.
NOTE:
1.VOX is not usable in noisy areas as it may start transmitting by the back noise.
2.An optional headset is necessary to use VOX function.