Alinco DJ-A10 - Manual (Page 44)

Professional
FM Transceiver
26
Side Key【PF2】Function Instruction
Default setting: Monitor function
1. Monitor function: In stand-by state, press and hold this key to open the squelch and monitor the
channel. Release the key to Exit.
2. Squelch Off: In stand-by state, press this key once to monitor, press it again to exit.
3. Press this key to turn on transceiver and hold it for 3 seconds to come into general setting setup.
BASIC OPERATIONS
3. Alarm Off: In the alarm mode, press this key to stop the alarm.
4. Jacklight Switch: In stand-by, press this key to switch on or off the jacklight.
5. Tone-burst tone transmitting: While transmitting, press and hold this key to send the selected tone-
burst tone.
Switch between VFO and Frequency+Channel Mode
Press【 D 】 key to switch between frequency mode (VFO) and Frequency + Channel mode or
Channel+Name Tag mode.
NOTE: When the channel hasn’t been preprogrammed, this operation is unavailable.