Alinco DJ-A10 - Manual (Page 47)

Professional
FM Transceiver 29
ADVANCED OPERATIONS
pressing【 A 】 key, while icon is displayed on the top left corner, press 【 4 】
key to choose positive offset direction (+), minus offset direction (-) or exit setting
(no icons displayed).
1.(+)Positive offset: Indicates the frequency is higher than receiving frequency.
When enable reverse function, the receiving frequency is higher than
transmitting frequency.
2.(-)Minus offset: Indicates the frequency is lower than receiving frequency.
When enable reverse function, the receiving frequency is lower than
transmitting frequency.
3. None: Indicates the radio is in the simplex mode.
NOTE:This function is unavailable in commercial radio mode.
Frequency/Channel Scan
While receiving, after pressing【 A 】 key, while icon is displayed on the
top left corner, press【 5 】 key to begin frequency scan or channel scan.
1.Frequency Scan
In VFO mode, it scans in accordance with the channel step. Press numeric
key or【 D 】 key to stop scanning.
2.Channel Scan
In channel mode, it scans in accordance with preprogrammed channels.
Press numeric key or【 D 】 key to stop scanning.