AIRLESSCO SS4550 - Manual (Page 16)

14 15
LINE STRIPING TIP CHART
NOTE: STRIPING TIPS SHOULD NOT BE USED FOR REGULAR SPRAYING.
• 1st 3-digits identifies it as a REV-TIP™ for airless line striping (Part Number 562-xxxST).
• 4th digit is the fan width - the number is half the fan width, e.g., 2means a 4" line width.
• 5th and 6th digits are for the orifice size and is measured in thousandths of an inch, e.g., 17 = 0.017 inch.
The higher the number, the larger the tip.
During use, high pressure will cause the orifice to grow larger. This destroys the pattern or will leave tailing or two heavy
lines on the outside of the pattern. REPLACE SPRAY TIP FREQUENTLY!
REV-TIP™
for Striping, Part Number 562-xxxST
REV-TIP™ protected By U.S. Patent No. 6,264,115. Other U.S. & foreign patents applied for.
TIP REPLACEMENT
TIP IDENTIFICATION
REV-TIP
TM
FOR STRIPING 562-XXXST
FAN WIDTH (6” FROM SURFACE) ORIFICE SIZE (INCHES)
INCHES MILLIMETERS .013 .015 .017 .019 .021
1-2 25-51 113ST 115ST 117ST
2-4 51-102 215ST 217ST 219ST 221ST
4-6 102-152 315ST 317ST 319ST 321ST
6-8 152-203 415ST 417ST 419ST 421ST
Striping paint Oil Base Oil Base Latex Latex Latex
REVERSIBLE STRIPING TIP SIZE CHART
OIL AND LUBRICATION INSTRUCTIONS
FIG. 12
SEALED BEARING
1 OZ. SAE 30 W OIL -
SEMI-ANNUALLY
FILL PLUG- UNIT HAS GREASE IN
GEARBOX FROM FACTORY AND WILL
NOT REQUIRE CHANGING.
(GREASE - PN: 301-178)
OIL IMPREGNATED SLEEVE-
DIP IN HOT 10 W OIL WHEN REMOVED
BLEED (WEEP HOLE)