AIRLESSCO SP200 - Manual (Page 23)

Storage
3A0994E 23
Storage
Short Term Storage
(up to 2 days)
1. Relieve pressure, page 10.
2. Leave suction tube and prime
tube in paint pail.
3. Cover paint pail and hoses
tightly with plastic wrap.
4.
a. Engage trigger
lock.
b. Leave gun
attached to
hose.
c. If you have not
already cleaned
them, remove
tip and guard
from gun and clean with water or flushing sol-
vent. A soft brush can be used to loosen and
remove dried on material if needed.
d. Wipe paint off outside of gun using a soft cloth
moistened with water or flushing solvent.
Long Term Storage
(more than 2 days)
• Always circulate PumpLife storage fluid through sys-
tem after cleaning. Water left in sprayer will corrode
and damage pump.
• Follow Shutdown and Cleaning, page 18, or Power
Flush Cleaning, page 20.
1. Place suction tube in
PumpLife storage fluid bot-
tle and prime tube in waste
pail.
2. Turn Prime/Spray valve to
PRIME.
3. Turn power switch ON.
4. Turn pressure control knob
clockwise until the pump turns
on.
5. When storage fluid comes out
of prime tube (5-10 seconds)
turn power switch OFF.
6. Turn Prime/Spray valve to
SPRAY to keep storage fluid
in sprayer during storage.
ti9353a
ti9350a
ti9671a
ti15981a
( ASM 500 )
ti15978a
( Mustang 2 )
ti2057a
ti9346a
ti5580a
ti9343a
ti9345a
ti2018a