Extron Electronics MTPX Series - Manual (Page 21)

Refer also to the
MTPX User’
s Manual
at www
.extron.com.
Refer also to the
MTPX User’
s Manual
at www
.extron.com.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Save and recall presets
N If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.
Save current configuration as a
global preset X1$, Spr X1$] Command character is a comma.
Example: 9 , Spr09 ] Save current ties as preset 9.
Recall a global preset X1$. Rpr X1$] Command character is a period.
Example: 5 . Rpr05 ] Recall preset 5, which becomes the current
configuration.
Lock (executive) modes
N See “Setting the front panel locks (Executive modes)” on page 3-4 for more information on the Lock modes.
Lock all front panel functions 1X Exe1 ] Enable Lock mode 1.
Lock advanced front panel functions 2X Exe2 ] Enable Lock mode 2.
Unlock all front panel functions 0X Exe0 ] Enable Lock mode 0.
View lock status X X1%]
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Information requests
Information request I V X1^ X X1& •A X1^ X X1&]
V X1^ X X1& is the video matrix size.
A X1^ X X1& is the audio matrix size.
Example: MTPX 3216 I V32X16•A32X16 ]
Request part number N X1*]
Query controller firmware version Q X1(]
Example: Q 1.23 ] The factory-installed controller firmware
version is 1.23 (sample value only).
N
X1^ = Inputs Total number of inputs for this switcher
X1&
= Outputs Total number of outputs for this switcher
X1*
= Part number
X1(
= Firmware version number to second decimal place (x.xx)
N
X1$ = Global or room preset # 0 - 32
X1% = Lock mode 0, 1, or 2
MTPX • Remote Contr
ol and Optimizing the V
ideo
Remote
Contr
ol
and
Optimizing
the
V
ideo,
cont’d
4-8
MTPX • Remote Contr
ol and Optimizing the V
ideo
4-9