AEC 3-Pump 33-Station Controllers - Manual (Page 23)

3–Pump 33-Station Controllers Chapter 3: Installation 22 of 51
2. Enter the station number for the lower end of the range you are copying to. Use
(Backspace Key) to erase any mistakes. Use (Enter Key) to enter the
value. The keypad disappears, and the “Station Copy” screen shows the station
number you entered under First Station.
3. On the “Station Copy” screen (Figure 8, touch the gray Last Station button. The
keypad pops up.
4. Enter the station number for the upper end of the range you are copying to. Use
(Backspace Key) to erase any mistakes. Use (Enter Key) to enter the
value. The keypad disappears, and the “Station Copy” screen shows the station
number you entered under Last Station.
5. Touch the green Copy to Range of Stations button. Complete briefly appears
on the screen.
6. As appropriate, either continue copying to other stations, or touch Return to go back
to the “Station Setup” screen.
Copying to All Other Stations:
1. On the “Station Copy” screen (Figure 8), touch the green Copy to All Stations
button. Complete briefly appears on the screen.
2. Touch Return to go back to th “Station Setup” screen.