Go to a preset point – ACTi ENR-110 ENR-120 ENR-130 ENR-140 User Manual
Page 45
ENR-100 Series User’s Manual
Go to a Preset Point
If the system administrator has previously defined certain PTZ preset points, you can directly
click on a preset button to have the camera find the corresponding view.
8 directional buttons
Zoom in / Zoom out
Focus Mode / Near Focus / Far Focus
Note
1. The zoom buttons are only applicable for those devices supporting optical zooming.
2. The focus buttons are only applicable for devices with controllable zoom lens, e.g.
KCM5211. Please remember to turn off the autofocus mode on device firmware before
using these buttons.
3. Make sure PTZ mode appears as
“Digital PTZ” on right-click channel menu.
Zoom Speed
Pan Speed
Tilt Speed
The executable preset point buttons
appear as buttons 1 and 2 below