Reset to factory default, Led indicators – ACTi ENR-110 ENR-120 ENR-130 ENR-140 User Manual
Page 14
ENR-100 Series User’s Manual
Reset to Factory Default
By resetting this device, all your system settings and system log will return to factory
default. It is strongly recommended that you back up previous settings with Backup function
and export the system logs before resetting to factory default.
1. To begin, please turn off the device first.
2. Press down the Power Button to boot up the device, and immediately press and hold the
Reset Button with a pin or clip, the System LED will light up for about 2~3 seconds, and
you may release the Reset Button as the red light is off.
The device will enter the resetting process immediately and automatically restart.
LED Indicators
The LED indicators on front panel show the current device status:
Item
Indicator Status
Light Color
Description
Power LED
Solid
Blue
The device power is on.
System Status
LED
Lights up for three
seconds after Reset
Button is pressed
Orange
The system resetting process is
initializing.
Solid
The system service is running.
HDD LED
Flashing
Green
The hard disk is in activity.