ACTi Edge Recorder Client for Windows V1.0.03 - Manual (Page 34)

www.acti.com
ACTi Edge Recorder User’s Manual
34
Configure PTZ Settings
On PTZ Setup section, you may configure the PTZ parameters of a
Pan/Tilt/Zoom device. These properties here have to match those on
(1) physical device and (2) device firmware.
PTZ devices can do panning, tilting and zooming automatically or through manipulation.
Once an ACTi PTZ device is added to ERC, the default settings of this device model will be
applied to enable PTZ functions, so that you may immediately start PTZ operations.
You may perform optical PTZ manipulation in the preview window here.
To do so:
1. Make sure the “Enable PTZ” is checked, a red crosshair will appear on the Live Preview
window.
2. Use the mouse to do the following PTZ operations:
 To execute optical Panning and Tilting, click anywhere on the live window to allow the
camera to move in that direction. The length of the direction indicator is proportional to the
Pan and Tilt speed. The farther you place the cursor from the center, the faster the
Pan/Tilt movement.
 To execute optical Zoom in or Zoom out, scroll the mouse wheel forward to zoom in;
scroll the mouse wheel backward to zoom out.