ACTi Edge Recorder Client for Windows V1.0.03 - Manual (Page 26)

www.acti.com
ACTi Edge Recorder User’s Manual
26
Delete a Device
To delete an existing device from Device List , select it and click “X”
Configure Camera Basic Settings
On Basic Setup section, you may watch the live view of the device and
change its connection basic settings.
To configure advanced camera settings, you may click “Web
Configurator ” to enter the device’s firmware interface.
It is also recommended that you cli ck “Get Device Settings” on ERC
after you have changed any setting on camera’s firmware.
Field Name Description
Device Name Enter the name of the camera, which will be shown in the Device List.
This name should be descriptive so that you know where the camera
is located. The name you input here will not change the setting on the
device’s firmware.
Protocol Select a streaming protocol to communicate with the camera.
IP Address Enter the camera’s IP address or host name.
Basic Setup