Installation, Method 1: surface installation – ACTi KCM-3311 User Manual

Page 8

Hardware Manual

Installation

The camera can be directly installed on walls or mounted in the ceilings using mounting kits.

This section describes the two basic ways that you can do to install the camera.

NOTE:

Due to continuous product improvements, the camera images on this documentation may

slightly differ from the actual camera that you received. Installation procedures remain the same.

Method 1: Surface Installation

You may directly drill holes on the wall or the ceiling and directly install the camera on a surface.

To do this, follow the procedures below:

1) Drill the holes

Using the supplied drill template in the camera package, mark the holes on the wall / ceiling and

drill the holes.

2) Remove the cover

Remove the dome cover by unscrewing the three attachments