Physical description, Hardware manual – ACTi KCM-3311 User Manual

Page 6

Hardware Manual

Physical Description

1) Reset Button

Step 1:

Switch off IP device by disconnecting the power cable

Step 2:

Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.)

Step 3:

Reconnect the power cable while continuing to hold the reset button.

The red Power

LED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another

second and turn off again. By this time the reset to default operation is already completed.

This

will take around 20 seconds from power up.

You may then release the reset button. This

length of time fluctuates slightly with the environment. The Power LED light will come back on

and stay on after a few more seconds. The unit will start up with factory default settings

automatically.

On (3s)

Power On

About 20 Seconds

Stay On

Off (about 15s)

Off (10~15s)

Restore to Default

Complete