ACTi KCM-3911 - Manual (Page 8)

www.acti.com
KCM-3911 Hardware Manual
8
2) Micro SDHC Card Slot
Insert a Micro SDHC card here for local recording (Micro SDHC card not included in the
package).
3) Power LED
The Power LED lights up when the camera power is on.
4) Audio Input / Output
This connector connects to the bundled audio cable which provides 3.5mm audio input and
output jacks. See Step 3: Connect the Cables on page 19.
5) Ethernet Port
The Ethernet port connects to a network using a standard Ethernet cable.
6) Digital Input / Output
This connector connects to digital input or output devices, such as an alarm trigger, panic
button, etc. Digital Input (DI) and Digital Output (DO) devices are used in applications like
motion detection, event triggering, alarm notifications, etc. Please refer to Prepare the DI/DO
Connector (Optional) on page 12 for information on how to connect DI/DO devices to your
camera.
7) DC 12V Power Input
In case the camera is connected to a non-PoE (Power over Ethernet) switch, use this
connector to connect the camera to an external power adaptor. Please refer to Prepare the
Power Adaptor (Optional) on page 10 for information.