Physical description – ACTi KCM-3911 User Manual

Page 7

KCM-3911 Hardware Manual

Physical Description

Reset Button

Ethernet Port

Micro SDHC Card Slot

Digital Input / Output

Power LED

DC 12V Power Input

Audio Input / Output

1) Reset Button

The Reset Button is used to restore the factory default settings of the camera, including the

administrator’s password.

The reset button can be used for following purposes:

The administrator

’s password has been forgotten and therefore the camera cannot be

accessed.

In case of IP address, mask, or allow/deny filter related issues, resulting with inability to

modify these settings.

In case of connectivity issues or abnormal video quality.

How to do the reset properly?

Step 1:

Disconnect the power supply (e.g. disconnect the power adaptor or the high PoE

injector).

Step 2:

Press and continue to hold the reset button (using a pointed object, such as a pen).

Step 3:

Connect the power supply while keeping the reset button pressed. During this time the

Power LED may turn on and turn off several times.

Step 4:

Wait for 45 seconds and release the reset button.