Adding cameras, Searching cameras to add, E 53 – ACTi ECD-1000 User Manual
Page 53
ECD-1000 User Manual
Adding Cameras
There are three ways to add cameras for viewing:
By automatically searching the cameras on the network
By manually entering the IP address of the camera
By manually entering the IP address of an ONVR-comppliant camera
By manually entering the IP address of the camera and connect via RTSP protocol
NOTE:
The Decoder supports third-party cameras. To validate specific camera models that
can be integrated, visit our websit
Searching Cameras to Add
If you do not know the IP address of the camera or you want to add several cameras at the
same time, you can search the cameras connected to the network and choose up to 4, 9, 12 or
16 cameras to connect to the Decoder. The maximum number of cameras to be added varies
depending on the selected module (see
on page 44).
1. On the Setup screen, click Camera.
2. Click Search or an empty channel number from the left panel. The Add Camera screen
appears.
3. Click Search Cameras. The Search Cameras screen appears.
4. By default, the camera manufacturer, user account name and password for access are
already filed with ACTi default values. If you want to add camera from other manufacturers
or the camera has different account and password, modify these values as needed. The
cameras connected on the network are listed.