ACTi E12A - Manual (Page 14)

www.acti.com
Hardware Manual
14
Other Accessories
How to Replace the Lens (Optional for E1xA / E14 only)
Aside from the bundled lens that came with the camera, optional lens with different focal and
iris specefications are available for separate purchase. For more information about lens model
and how to purchase, please visit our website ( www.acti.com ).
To replace the lens, perform the procedures below:
1. Loosen the two (2) screws holding the lens to the module.
2. Turn the bundled lens counter-clockwise until the lens is detached from its module.
3. Attach the new lens by turning the lens clock-wise until it is secured on the module.
NOTE: The lens do not need to be screwed to its maximum since turning the lens also
adjusts the focus.