Installation procedures, Step 1: mount the bracket, Step 2: insert the memory card (optional) – ACTi E12A User Manual
Page 10
Hardware Manual
Installation Procedures
NOTE:
The camera images are used as a reference only. The lens may differ from the one you
purchased.
Step 1: Mount the Bracket
Attach the bracket to the wall using the three (3) supplied screws.
Step 2: Insert the Memory Card (optional)
1.
Pull to open the memory card slot cover.
2.
Insert the memory card with the metal contacts facing the back of the camera.
3.
Push the card until it clicks into place.
4.
Close the memory card slot cover.
This manual is related to the following products: