beautypg.com

Step 2: prepare the flush mount, Step 3: loosen the retaining brackets – ACTi Indoor PTZ on Dropped Ceiling with Flush Mount User Manual

Page 4

background image

www.acti.com

Installation Guide

4

Step 2: Prepare the Flush Mount

1.

Push to detach the cover ring from the mount as marked below. Then set the cover ring

aside.

2.

Peel off the lining of the three (3) foam rubber pads and attach a rubber pad to each

retaining bracket.

Step 3: Loosen the Retaining Brackets

Using a screwdriver, loosen the retaining brackets according to the thickness of the ceiling.