ACTi Indoor PTZ on Dropped Ceiling with Flush Mount - Manual (Page 3)

www.acti.com
Installation Guide
3
Installation Procedures
Use the Flush Mount when installing the camera on a dropped ceiling; there is space above the
ceiling where the camera body can be hidden from view and only the dome cover can be seen
underneath the ceiling.
NOTE: The Flush Mount is not included in the camera package. Contact your sales agents to
purchase.
Before installation, prepare the following:
Flush Mount Kit Other Tools (not supplied)

Flush Mount

Drill template

Screw (1)

Foam rubber pads (3)

Fixing bracket

Jig saw

Phillips screwdriver
To mount the camera, follow the procedures below:
Step 1: Drill a Hole on the Ceiling
Drill a 184-mm diameter hole on the ceiling where you want to mount the camera, then route the
network cable, power adaptor, and other cables (e.g. DI/DO, audio cables, etc.) through the hole.