beautypg.com

Appendix, How to install extension tubes – ACTi Indoor PTZ on Straight Wall with Accessory Sets of PMAX-0305 User Manual

Page 9

background image

www.acti.com

Installation Guide

9

Appendix

How to Install Extension Tubes

If the Heavy Duty Mount is not long enough, add one extension tube (purchased separately).

1.

Remove the two (2) pre-installed screws on the extension tube.

2.

Insert the cable into the extension tube.

3.

Align the slot on the extension tube to the tab inside the Heavy Duty Mount and install the

extension tube.

Cable With Flex Conduit

Cable without Flex Conduit

4.

Twist the extension tube to align the screw holes and reattach the two (2) mounting screws

removed from step 1

or