ACTi Indoor PTZ on Straight Wall with Accessory Sets of PMAX-0305 - Manual (Page 7)

www.acti.com
Installation Guide
7
Step 4: Install the Camera
1. If necessary, insert a memory card into the card slot of the camera.
2. Connect the network cable to the Ethernet port of the camera. If necessary, connect the other
cables (such as power adaptor, DI/DO, etc.) to the corresponding connectors.
NOTE: Try to push the network cable further into the mount to avoid cables dangling from
behind the camera.
T I P: If the network cable texture is rough and not easily bent, use the bundled network
extension cable (included in the mount kit package) to easily route the cables because of its
flexibility.
3. Align and insert the camera base hooks to the mounting holes.
4. Slide the camera counter-clockwise to secure the hooks to the mount.