ACTi Indoor Dome (B6x) on Tilted Wall - Manual (Page 8)

www.acti.com
Installation Guide
8
2. Loosen the rotation adjustment screw, rotate the viewing orientation, and then tighten
back the screw to fix the orientation.
3. Loosen the pan adjustment screw, move the pan direction, and then tighten back the
screw to fix the pan position.
Step 7: Close the Dome Cover
1. Align the screws with the screw holes of the camera. Note that if the cables are routed
along the surface, route the cable to pass through the cable hole on the dome cover.
2. Tighten the three (3) screws to attach the dome cover to the camera body.