Hardware manual – ACTi B94 User Manual
Page 25
Hardware Manual
10.
Connect the network cable to the Ethernet port and other cables (if any) to the corresponding
connectors on the camera. If necessary, install also the memory card at this point (for
B94~B97 models).
11.
Align the camera module to the guide on the housing.
12.
Tighten the three (3) screws to secure the camera module to the housing.
13.
Proceed with
Step 4: Install the Camera to the Surface
on page 26.
Ethernet Port
Digital Input / Output (DI/DO)
and Audio Input / Output
Connector
12V Power Connector
Memory Card Slot
(B94~B97 only)