ACTi V11 - Manual (Page 8)

www.acti.com
Mini Video Encoder Hardware Manual
8
6 DC 12 V Power
Connector
In case the encoder is connected to a non-PoE
(Power over Ethernet) switch, use this connector to
connect the encoder to an external power adaptor.
See
Connecting a Power Adapter ( Optional) on page 11
for more information.
7 Ethernet Port Connects to the network using a standard Ethernet
cable.
Mounting the Device
The encoder can be directly mounted on a flat surface, such as walls.
Attach the four (4) supplied screws to secure the device.