ACTi V11 - Manual (Page 7)

www.acti.com
Mini Video Encoder Hardware Manual
7
Physical Description
Item Description
1 Audio Input /
Output
Connector
Connects to audio input and output devices, such as a
microphone with built-in amplifier, speaker, etc. See
Connecting Audio Devices (Optional) on page 13
for more information.
NOTE: The microphone must have a built-in amplifier.
Connecting an ordinary microphone will dwarf sounds
and will result in inaudible recording.
2 Video In
Connector
Connects an analog camera through BNC connection.
See Connecting the Analog Camera on page 10 for
more information.
NOTE: Video cable with BNC connector not included
in the package.
3 Power LED Lights up when the device is powered on.
4 Video In Activity
LED
Lights up when an analog camera is connected to the
encoder.
5 Reset Button Use to restore the factory default settings, including
the administrator’s password. Using a pointed object,
such as a pen, press and hold the Reset button for 10
seconds or until the Power LED goes off.