ACTi V11 - Manual (Page 13)

www.acti.com
Mini Video Encoder Hardware Manual
13
Connecting Audio Devices (Optional)
Audio input / output devices, such as an active microphone or speaker can be connected to the
encoder using the supplied terminal block.
Press and hold the orange tab as you insert the wire through the pin slot, then release the orange
tab to secure the wire.
To connect audio devices, map the pins to one of the pin combinations below:
Device Pin Label Mapping Instructions
Audio Output
AOUT Connect the wires of the audio output device to
AOUT and GND .
GND
Audio Input
AIN
Connect the wires of the audio input device to AIN
and GND .
GND
NOTE : For more information about AUDIO in connections, please refer to the Knowledge Base
article How to Use Audio-in of ACTi Encoders , downloadable from the link below
( http://www.acti.com/support/KnowledgeBase/outside/detail.asp?KB_ID=KB20100114003 ).