Step 3: connect the cable(s), Hardware manual – ACTi B21 User Manual
Page 24
Hardware Manual
Step 3: Connect the Cable(s)
1.
Connect the network cable to the Ethernet port of the camera.
2.
If necessary, connect the other external devices, such as DI/DO, PT scanner or power
on page 13 for more information.
3.
Connect the other end of the network cable to a switch or injector. Then, connect the switch
or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection
example below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
This manual is related to the following products: