Mounting options – ACTi B21 User Manual
Page 11
Hardware Manual
Mounting Options
The camera can be installed both indoors and outdoors. For outdoor installation, additional
waterproof housing is required. Below are several mounting options that you can use to install the
camera. Select the most suitable solution for your installation environment.
Mount Types
Accessories
Ceiling or Wall
(Indoor)
For indoor applications, the camera can be mounted on the
ceiling or wall using an indoor bracket (not included in the
camera package). You may use the bracket from a local
supplier or purchase ACTi’s indoor bracket.
Indoor Installation Procedures
on page 21 for more
information.
PMAX-1105
Wall
(Outdoor)
A waterproof housing is required when installing the camera
outdoors.
The following accessory sets can be used:
SMAX-0229:
Wall Bracket with Housing (110V) and
Mounting Block
SMAX-0230:
Wall Bracket with Housing (220V) and
Mounting Block
SMAX-0003:
Wall Bracket with Housing
Pole Mount
(Outdoor)
Suitable when mounting the camera on vertical poles. The
camera must be enclosed inside the waterproof housing.
The following accessory se3s can be used:
SMAX-0232:
Pole Mount with Wall Bracket, Housing
(110V) and Mounting Block
SMAX-0234:
Pole Mount with Wall Bracket, Housing
(220V) and Mounting Block
SMAX-0095:
Pole Mount with Wall Bracket and Housing