ZeeVee ZvCli User Manual User Manual
Page 25
Zv‐Cli v1_3 www.zeevee.com
Page
25 of 32
system send‐troubleshooting‐report
system show‐saved‐troubleshooting‐reports
system send‐saved‐troubleshooting‐reports
Example:
ZvCli$
system send‐troubleshooting‐report
Sending troubleshooting report...
Getting system status...
Getting configuration...
Getting ZvBox log file...
Success
Getting firmware log file... Success
Getting TVRF log file...
Success
Getting free channels list... Success
…
Sending report...
Report failed: Download error: couldn’t resolve host name
Wrote troubleshooting report to file: “report‐2009‐12‐09‐134552.json”
ZvCli$
system show‐saved‐troubleshooting‐reports
1 saved troubleshooting report:
report‐2009‐12‐09‐134552.json
ZvCli$
system send‐saved‐troubleshooting‐reports
Sending report “report‐2009‐12‐09‐134552.json”: report sent successfully, removing file
ZvCli$
Advanced Firmware Download and Installation Commands
The simplest way of downloading and installing firmware to a ZvBox is by using the “download firmware”
command. This command requires that you are connected to both the Internet and a ZvBox, and that you want
to download the latest firmware as determined by ZeeVee’s download server. If you wish to download/install a
particular version, or if you do not have access to the Internet while connected to the ZvBox, then you will use
the advanced commands.
The advanced download commands allow you to:
• View available downloadable firmware images on ZeeVee’s download server.
• Download specific firmware images from ZeeVee’s download server to your computer without needing
a connection to a ZvBox.
• Install a specific firmware image to ZvBox without an Internet connection.
Displaying Downloadable Firmware Images on ZeeVee’s Download Server
One can see what firmware images are available to be downloaded. The optional ‘passphrase’ can be used if
ZeeVee has given you a specific passphrase that allows you to see additional downloadable versions of firmware.
Syntax
download advanced show‐downloadable‐firmware [passphrase “passphrase”]
Example: