Emerson LD195EM8 7 - Manual (Page 27)

27
EN
DVD SETTING
TROUBLESHOOTING
INFORMATION
OPERATING DVD
INTRODUCTION
WATCHING TV
PREPARATION
INITIAL SETTING
OPTIONAL SETTING
C. Change Password C. Change Password
Although the default code “0000” is supplied with the unit, you can set
your own password.
4
Use [Cursor K / L] to select “CHANGE PASSWORD”,
then press [ENTER].
e.g.) digital TV mode
or
- V - CHIP SETUP -
TV RATING
MPAA RATING
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
DOWNLOADABLE RATING
CHANGE PASSWORD
5
Use [the Number buttons] on the remote control to
enter the new 4-digit password.
• Enter password again in “CONFIRM PASSWORD”
space.
NEW PASSWORD
_ _ _ _
CONFIRM PASSWORD
_ _ _ _
6
Press [SETUP] to exit.
Note:
• Make sure new password and confirm password must be
exactly the same. If they are different, the space is cleared
for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs. If you forget the
password, unplug the power cord for 10 seconds to restore
the password to 0000.
A84N3UH_A84N1UH_LD195EM8 2_LD19527 27 A84N3UH_A84N1UH_LD195EM8 2_LD19527 27 2008/02/15 14:31:35 2008/02/15 14:31:35