Xoro HRS 8540 - Manual (Page 13)

12/31
You can press VOL+/VOL- button to move the dish and when it move to the correct
position, you can press the OK button to save the position.
Recalculation
You can press OK button to recalculate.
4. Navigate with the arrow key DOWN to Delete All, press ok will delete all satellite
positions. This item is only valid in “DiSEqC1.2” mode.
5. Navigate with the arrow key DOWN to Limit Setup, press OK button.
Limit Setup
You can set the East/West limit.
Select the East Limit or West Limit
by the VOL+/VOL- button. Then
move the highlight to the Limit setup
item and move the dish to west or
east by pressing the VOL+/VOL-
button manually. When you are
moving to the target place, press OK button to limit.
4.3.2 Antenna Setup for USALS
The operations are almost same to DiSEqC 1.2, only the difference is you can set
local longitude and latitude, then the Motor will rotate to the correct angle
automatically.
4.4 Satellite List
Satellite List allows you to
Edit/Add/Delete/Select the
satellite.