EverFocus Gigabit Managed Ethernet Switch ESM308T000D User Manual
Page 26
26
WEB-BASED BROWSER MANAGEMENT
Reboot
Click
Yes to restart the switch. The reset is complete when the Power LED stops
blinking.
Factory Default
This function is to force the switch back to the original factory settings. To reset the
switch, select
Reset to Factory Defaults from the drop-down list and click Apply.
The LAN IP Address, Subnet Mask and Gateway IP Address will be reset to their
factory settings.
Software Upload
Select
Upgrade Firmware from the Tools drop-down list, click Browse to select
the firmware file, then click
Upload.
Configuration File Transfer
This allows you to save the switch’s current configuration or restore a previously
saved configuration back to the device. Configuration files can be saved to any lo-
cation on the Web management station. Click
Browse to find a configuration file,
then click
Upload to save it or Download to restore it.
Logout
The administrator has write access for all parameters governing the onboard agent,
so you should assign a new administrator password as soon as possible and store
it in a safe place.