Eiki LC-XS25 - Manual (Page 36)

36
Computer Input
When the Digital zoom + is selected, the On-Screen Menu
disappears and the message "D. zoom +" is displayed.
Press the SELECT button to expand the image size. And
press the Point
▲▼◄► buttons to pan the image. The
Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
▲ button on the remote control.
Digital zoom +
When Digital zoom – is selected, the On-Screen Menu
disappears and the message "D. zoom –" is displayed.
Press the SELECT button to compress image size.
A projected image can be also compressed by pressing
the D.ZOOM
▼ button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
▲▼ buttons, SELECT, and Point buttons.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment or select an input source
from the Input Source Selection (p.26) again, or adjust the
screen size with the D.ZOOM
▲▼ buttons.
Digital zoom –
For zooming in and out the images
1 2
+
_
Remote Control
D .ZOOM
▲ button
POINT buttons
SELECT button
D .ZOOM
▼ button

Notes:
• The panning function may not operate properly if the
stored Mode in the PC Adjust Menu is used. (p.30)
• The minimum compression ratio can be limited
depending on the input signal or when the Keystone
function is working or when the Custom is selected for
the screen size.
• True, Full, and Digital zoom +/– cannot be selected
when 480i, 575i, 480p, or 575p is selected in the PC
System Menu (p.27).
• Digital zoom +/- cannot be selected when Full or True
is selected.