Widex PA-440 - Manual (Page 25)

48 49
Hearing aid with an open ear-tip
Pull the pointed end of the an-
chor through the upper hole on
the receiver located at the end
of the earwire.
Continue pulling until the an-
chor is stopped by the grip at
the end. The angled grip should
be pointing towards the hear-
ing aid.
Your ear-set is now ready for use and
is placed so that it rests comfortably
in your ear.
Earwire and ear-tip size
The ear-set must fit your ear exactly. It is important to
choose the correct earwire length and ear-tip size in or-
der to ensure a good and comfortable fit.
Furthermore, to secure the position of the ear-tip in
your ear canal, you should use an anchor. The anchor
can be trimmed to fit your ear.
Your hearing care professional will choose the correct
ear-set size and help you trim the anchor. Also see the
instructions on how to trim the anchor.
At the back of this booklet your hearing care profes-
sional can write down the sizes selected for you.
The anchor
The anchor is supplied sepa-
rately from the rest of the ear-
set and can be used in different
ways. First it is shown how the
anchor can be used without pri-
or trimming: