Widex IN-19 - Manual (Page 8)

1 1
Possible settings when turning on
your hearing aid
Your hearing aid can be set to start up in two diffe-
rent ways. In the standard start-up setting your
hearing aid may whistle slightly while you insert
the earmould in the ear. An alternative is a setting
where the hearing aid actively suppresses whistling
while the earmould is being inserted in the ear. To-
gether with your hearing care professional you can
choose the start-up setting that suits your needs
best.
Removing Inteo
Turn off your hearing aid before removing it. First
remove the hearing aid from its position behind
the ear. Carefully pull the earmould out of the ear
canal, while holding the lower part of the tubing. If
it is difficult, it may help to try to move the ear-
mould carefully from side to side while pulling it
out. It may also help to pull the outer ear back-
wards and upwards with the opposite hand.