Westermo WeConfig User Manual
Page 12

12
6642-22521
Ports
Select devices in the topology map (CTRL + click device to select devices in desired
order) or list view (CTRL-A in the list selects all devices) and click the Add button in the
Ports tab to add them to the working selection for performing Ports configuration of the
devices.
Use the sorting feature to order the units in desired order before applying configuration,
or select them in the desired order before adding.
To set specific speed/duplex on ports, just uncheck the Auto checkbox.
Edit the fields directly in the list. The configuration will be applied on the devices in the
list when pressing Apply.
General
Select devices in the topology map (CTRL + click device to select devices in desired
order) or list view (CTRL-A in the list selects all devices) and click the Add button in the
General tab to add them to the working selection for performing General configuration
of the devices.
Use the sorting feature to order the units in desired order before applying configuration,
or select them in the desired order before adding.
The General tab is divided in four sub tabs; Logging, Network, Time/date and Alarm. To
configure, check the checkbox to the left of the field of interest and provide desired data.
The configuration, from all General sub tabs, will be applied on the devices in the list
when pressing Apply.
• Logging
Configure Syslog Server 1 and 2.
• Network
Configure default gateway, enable/disable routing and DNS server 1 and 2.
• Time/date
Either configure time/date using current host time or SNTP.
Configure time zone, NTP server address and NTP poll interval.
• Alarm
Disable link alarm on all ports, enable on all tagged ports, enable on all
untagged ports, enable on all FRNT ports, enable on all RSTP ports (non
Admin Edge) or enable on all ports currently having link status up (link to
PC excluded).