Configuration – Westermo ED-10 TCP User Manual

Page 19

Text mode
Original mode

6609-2211

7. Configuration

7.1 Configuration by ED-Tool

ED-Tool is intended to be used with a number of products.
This section describes ED-Tool program start and configuration of the ED-10 TCP using
the ED-Tool program.

Before read, write or reboot can be made, Select type of connection.

• Network

• Serial com port must be selected from menu ’Tools – Serial – Port’

• When reading configuration from attached unit the type specific (ED-10 TCP)

property tab will automatically selected and the field ’Type’ in the Staus bar shows the
identity (ED-10 TCP) of the attached unit.

• When writing configuration to attached unit the valid type specific (ED-10 TCP)

property tab shall be selected and none of the parameter fields shall be left empty.