Basic ethernet configuration – Westermo DR-250 User Manual
Page 17

17
6622-2211
Basic Ethernet configuration
Basic IP Address
• Static IP
To change the default IP-address 192.168.0.99 and subnet mask to something else.
Basic IP Address
• DHCP
Minimum assigned IP address: eg 192.168.0.2
IP address range:
eg 20 (highest address will then be 192.168.0.22)
DNS server address:
Address of router (192.168.0.99 default setting)
Gateway address:
Address of router (192.168.0.99 default setting)
Mask:
255.255.255.0
All settings above must be saved to one of the two profiles and then restarted.
After that change the IP-address of the client computer to accept an IP-address from the
DHCP server in the DR-250 and verify that the computer receive a correct IP-address.
Time
To setup the internal clock of the router to get correct time in logs etc.
- TR-36B (88 pages)
- TD-36 (44 pages)
- TR-36 (36 pages)
- TR-36B (20 pages)
- IDW-90 AT (97 pages)
- GD-01 (206 pages)
- GD-01 (20 pages)
- MRI-128-F4G (175 pages)
- MRI-128-F4G (169 pages)
- GDW-11 485 (380 pages)
- GDW-11 (40 pages)
- Lynx Series (28 pages)
- ODW-720-F2 (36 pages)
- ODW-720-F1 (20 pages)
- ODW-720-F1 (24 pages)
- ODW-730-F2 (36 pages)
- ODW-730-F1 (24 pages)
- DDW-120 (24 pages)
- DDW-226-EX (24 pages)
- DDW-226-EX (24 pages)
- DR-270 (28 pages)
- DR Series (460 pages)
- ED-2x0 (20 pages)
- MRD-3x0 (199 pages)
- FD-80 (24 pages)
- FDV-206-1D-1S (24 pages)
- GD-01 US (24 pages)
- LD-01 (8 pages)
- IDW-90 (44 pages)
- Lynx-x10-F2G (16 pages)
- Lynx-x08-F2G-S2 (20 pages)
- MDI-110-F3x (16 pages)
- MR-2x0 (28 pages)
- ODW-642 (28 pages)
- PII PoE Injector (12 pages)
- Viper Series (977 pages)
- SDI-5xx (12 pages)
- RFI-xx (32 pages)
- SDI-8xx (16 pages)
- RFIR-xxx (24 pages)
- TD-29 (16 pages)
- SDW-5xx (24 pages)
- TD-23 (24 pages)
- TD-29P (16 pages)
- Viper 408 (20 pages)