Westermo ED-2x0 - Manual (Page 15)

15 6609-2281
DIP-switch settings for ED-200
Before setting DIP-switches:
Prevent damage to internal electronics from electrostatic discharges (ESD)
by discharging your body to a grounding point (e.g. use of wrist strap).
Reset switch
The reset button can be used to make a make a factory reset of the unit.
All settings will return to factory default.
Note! Do not disconnect power during the factory reset process.
The process takes 90 second to complete.
Factory settings
ON
1 2 3 4
RS-422 termination
ON
1 2 3 4
No termination or
failsafe
ON
1 2 3 4
Not used
ON
1 2 3 4
Termination of receiver
with failsafe; R+ and R–
Reset botton
DIP-switch