Welltech WeIIBilling 6600 V.1.5 - Manual (Page 18)

Welltech Computer Co., Ltd.
WellBilling 6600 18
On/Off Net Max Extend Days: The maximum recharge
extend day for a on/off net user
Subscriber Service Modification: Allow subscriber to change
their service setting or not.
Max ANI per Subscriber: Max ANI allowed per subscriber
Apply Change Mode: The way system will take the change
− DB Pooling: System will periodically pool the system
changes and take effective automatically.
− Manual: The system will only take the change when user
click the apply change.
Apply Change Polling Interval (sec): The DB checking
interval. It you set it too small, it might hit the 6600 and DB
server’s performance.
Display Plain-text Password: Display password in plaintext
Change Tel-No: Allow to change WellSIP Tel-no or not?
When your change the Tel-no, the system will delete from
6500 and insert a new one there. Also the subscriber CPE
also needs to make the same change.
Rate Plan Hunting Policy:
− Continue: If the prefix doesn’t found on the highest priority
rate plan, it will go for next priority rate plan.
− First Only: If the prefix doesn’t found on the highest priority
rate plan, WellBilling 6600 will reject the request.
Enable Balance Transfer: Allow transferring balance in
between subscriber or reseller, reseller or group reseller,
group reseller or distributor.
Recharge Report for Subscriber: Allow the subscriber to see
the recharge report or not when a subscriber is login.
Talk Time After Deduct Ignore Seconds: Whether to show
the talk time which already deduct the ignore time (defined
in rate plan) or not. For example, you have ignore time
setting (e.g. 5 seconds) in the applied rate plan and your
original talk time is 60 seconds, the CDR will show 55
seconds if you turned on this option.
Accounting Start: Whether to write RADIUS account start in
CDR or not.