Welltech SIPPBX 6200 V.1.0 Quick Start - Manual (Page 31)

Welltech Computer Co., Ltd.
Figure 5.6
Ⅲ: Subscriber to Subscriber Internal Call Test
Please refer to the following steps to do a simple test about subscriber to
subscriber internal call.
Step 1: Telephone 101 dial 301
Step 2: Telephone 301 should be ringing
Step 3: Telephone 301 answer and talk to 101
Ⅳ: Subscriber to PSTN Gateway Outgoing Call Test
Please refer to the following steps to do a simple test about subscriber to
PSTN Gateway outgoing call test.
Step 1: Make a call from subscriber 101 to PSTN Gateway by dial PSTN
number xxx-xxxx.
Step 2: Telephone number 101 should hear ring tone.
Step 3: PSTN number answer and talk to 101
Ⅴ: PSTN Gateway to Subscriber Auto Attend Call Test
Please refer to the following steps to do a simple test about PSTN
Gateway to subscriber Auto Attend call test.
Step 1: Make a call to PSTN line.
Step 2: PSTN side should hear Auto Attend Call flow
Step 3: Input extension number 101 for transfer
Step 4: Telephone 101 should be ringing
Step 5: Telephone 101 answer and talk
SIPPBX 6200 Quick Guide – V1.0 - 31 -