Welltech LP-389 v.1.06 Operation Guide - Manual (Page 57)

57
Setup a conference
The LP389 can support 3 ways conference by using local conference bridge.
More than 3 ways can be archived by using server conference bridge such
as SIPPBX 6200S/GS. When you setup the corresponding server conference
prefix, the selection to use local or server conference are automatic.
1. A press “
” dial out and talk with B.
2. A press “ ” to hold B. B hear hold tone music.
3. A press “ ” dial out and talk with C.
4. A press “ ” to talk with B and C.
5. If you have server conference bridge (such SIPPBX 6200S/GS) and do
the required settings, you can have more than 4 parties conference as
started by step 6.
6. A press “ ” to dial out to D and talk
7. A press “ ” to have conference to talk with B, C and D
8. A press “ ” to dial out to E and talk
9. A press “ ” to have conference to talk with B, C, D and E
Pickup a ringing extension
Pickup:
- Enter extension before press “ ” button, call pickup
- Press “ ” button with any input, group pickup or global pickup
(programmable)
1. B dials out to C, C ringing.
2. A press “
” to pickup the call
3. A talk with B
Call Transfer
1. A talk with B, A press “ ”
2. A hear dial tone, B hear hold tone music
3. A dial out to C
4. A can hang-up the call or wait C to answer the call and talk
5. A hang up the call
6. B talk with C