Welltech LP-389 v.1.06 Operation Guide - Manual (Page 13)

13
○ a Handset ○ f Alphanumeric Keys
○ b Display ○ g Speaker
○ c Function Keys ○ h Audio Control Keys
○ d Navigation Keys ○ i Feature Keys
○ e Status Indication ○ j Headset (3.5mm Audio Jack) &
Handset Jack
Use the MENU key “ ” to call up the main menu. To cancel actions or
input, use the CANCEL key “ ”. The ENTER key “
” confirms actions,
selections and inputs. For navigation, use the large round navigation key in
the middle.
Depending on the operating mode, the keys can have context-specific
meanings which are described in the manual.
The four soft keys located below the display are context-sensitive function
keys. Their current mapping is depicted with symbols in the bottom line on
the display.
The twelve keys on the right with LEDs next to them are the programmable
function keys onto which different functionalities can be mapped.
By default they are mapped to trunk lines. An incoming call is indicated by
the fast-blinking LED of the trunk line. To pick it up, press the
corresponding key.
To put the call on hold, press the key again. To pick up a call on hold, as
indicated by the slow-blinking LED, press the corresponding key.
The keys of the Alphanumeric block
Key Digits Lower case Upper case
0 (SPC)_0 (SPC)_0
1 @ @