Wavetronix SmartSensor HD (101-0415) - Quick-reference Guide (User) - Manual (Page 4)

WX-500-0171
© 2014 Wavetronix LLC. All rights reserved. Protected by US Pat. Nos. 6,556,916; 6,693,557; 7,426,450; 7,427,930; 7,573,400; 7,889,097; 7,889,098; 7,924,170; 7,991,542; 8,248,272;
8,665,113; and Cdn. Pat. Nos. 2,461,411; 2,434,756; 2,512,689; and Euro. Pat. Nos. 1435036; 1438702; 1611458. Other US and international patents pending. Wavetronix, SmartSensor, Click,
Command and all associated logos are trademarks of Wavetronix LLC. All other product or brand names as they appear are trademarks or registered trademarks of their respective hold-
ers. Product specifications are subject to change without notice. This material is provided for informational purposes only; Wavetronix assumes no liability related to its use.
7
Download data
To download data stored on the sensor to your computer, click the Download
link on the Data page, then follow these steps:
1 Enter a name for the download at the top of the screen.
2 Select Download all of the data or select a time range to download.
3 Click Start Download.
A progress window will appear, and then, when the down-
load is complete, you’ll see the window shown at left, which
gives you information about the download as well as options
to view or export the download in the following formats:
˽ CSV (comma separated values)
˽ Excel
˽ Legacy format (text file)
You can view previous downloads by clicking the green arrow icon in the lower right corner of the screen.
8
Use tools
If needed, the Tools area has three tools that allow you to work with and find information about your sensor.
Backup-Restore
This screen lets you create a backup of the current sensor settings (by naming the
file in the top text field and clicking Back-up Sensor Setup) or load a backup of
previous settings to the current sensor (by locating the file and then clicking Restore
Sensor Setup).
Licensed Features
This screen shows you information about the license for the
current sensor; you can also load a new license using the
License File area.
Power
The power screen lets you remotely reboot the sensor, and also
gives you information about the last time it was powered up
and down.