Watson-Marlow NBR - Manual (Page 11)

10
important, refer to the drawings below for a proper hose
connection. The hose clamp should be installed against
the bracket E (example 1) or at the indicated position on
the bushing G (example 2).
Example 1 Hose connection (EHEDG) with a hose bore > 20mm.
A: Pump hose
B: Pump
C: Detail Z (see detail image on page 12)
D: Hose clamp
E: Bracket
F: Stainless steel insert
G: Pipe flange
H: O-ring
WARNING
Only use genuine Bredel parts for a proper
hose connection.
A B C D E H G F