Operator’s manual, 2 caution – Watson-Marlow FC32 User Manual
Page 4
OPERATOR’s MANUAL
FC32
FC32 OM 1.02 EN
Version: 1.02
Page 4 of 10
2 Caution
This manual should be read before using the FlexCap 32.
Explanations to the pictograms:
"Warning against touching"/ "Warning against dangerous part of the machine":
"Warning against high voltage":
When adjusting the machine makes sure that the gab between the screw head and bottle cap is less
than 3 mm.
The mains switch is used for emergency stopping.
FlexCap 32 should only be used for capping bottles.
The FlexCap 32 must be placed on a stable bedplate and in such a way, that it is not exposed to
great humidity, high temperatures or other abnormal operating-environments. It is not to be used in
explosion hazardous environments.
It is prohibited to maintain or clean the FlexCap 32, when it is connected to the power supply.
It is prohibited for unauthorised personnel to open the cover of the FlexCap 32’s electrical parts.
Always remember that the FlexCap 32 must be earthed by way of the switch.