Watson-Marlow PD22I - Manual (Page 21)

OPERATORS MANUAL Machine Type: PD22I / PD22P
PD22 I P OM 1.01 EN Ver 1.01 Date 24-08-2006 Page 21 of 21
11 CHANGE OF VOLTAGE
Fig. 11.1
The PD22I can be converted to accept another supply voltage. The conversion can be made
inside the machine by moving the cables of the transformer clamps.
COPYRIGHT
*********
Copyright (c) 2006 Flexicon A/S. All rights to this manual belong to Flexicon A/S. Neither the
complete manual nor parts of it may be translated, copied, printed or published in any form or
by any means without permission in writing from Flexicon A/S
Flexicon A/S is convinced that the information of this manual is correct, but Flexicon A/S
cannot be held responsible for it.
Flexicon A/S reserves the right to update and amend this manual without previous notice.
Flexicon A/S is under no obligation to update manuals already published.