Watson-Marlow PD/40 - Manual (Page 22)

22
9 EC DECLARATION OF CONFORMITY
We,
Watson Marlow Bredel B.V.
Sluisstraat 7
P.O. Box 47
7490 AA Delden
The Netherlands
herewith declare, on our own responsibility, that the following partly completed machinery
to which this declaration applies, fully or partly complies with the essential requirements of:
•
the European machine directive 2006/42/EC, annex II.1.B, EN60204-1 and
•
the European pressure equipment directive 97/23/EC (PED).
Pulsation damper for hose pumps,
PD/40, PD/65 and PD/100
The products as mentioned above comply to fluid classification group I (dangerous fluids) and were
subjected to the conformity assessment procedure as mentioned in the table below. EC-type
examination (module B) has been in conformity with AD 2000 Edition 2002.
Type Module(s) Cat.
PD/40 A1 I
PD/65 B + C1 II
PD/100 B + C1 III
The monitoring of the products is performed by Lloyds Register Netherlands B.V., located in
Rotterdam, the Netherlands. Lloyd’s Register Netherlands is a registered body notified under
directive 97/23/EC Pressure Equipment under identification number: 0038.
When this pulsation damper is to be installed into a machine or is to be assembled with other
machines for installations, it is not be put into service until the relevant machinery has been declared
in conformity with these guidelines.
J. van den Heuvel,
Managing Director,
The Netherlands, Delden
1 August 2013