Watson-Marlow GD30I - Manual (Page 7)

OPERATORS MANUAL Machine Type: GD30I
GD30I OM 1.01 EN Ver 1.01 Date 24-08-2006 Page 7 of 15
3.4 Addressing of filling station
Fig. 3.2
Address "1" is the factory setting of GD30I.
If the GD30I is one of several filling stations in a system, none of the stations may have the same
address and it must therefore be changed.
Change of address is performed via a dip-switch placed at the bottom of the GD30I. This change
may only be carried out when the machine is turned off at the main switch.
Addresses between 1 and 16 may be chosen, and Fig. 3.2 shows the various combinations.